Nikon AF-S Nikkor 600mm F/4E FL ED VR

Super telephoto prime lens • Digital era

AF-S The lens is equipped with Silent Wave Motor.
E The lens incorporates an electromagnetic diaphragm mechanism.
FL The lens incorporates fluorite elements.
ED The lens incorporates low dispersion elements.
VR The lens is equipped with Vibration Reduction.

Model history

Digital Nikon AF-S Nikkor 600mm F/4E FL ED VR16 - 124.4m(40.5mm) Jul 2015
Digital Nikon AF-S Nikkor 600mm F/4G ED VR15 - 125m(52mm) Aug 2007
Film Nikon AF-S Nikkor 600mm F/4D IF-ED II10 - 75.6m(52mm) Apr 2001
Film Nikon AF-S Nikkor 600mm F/4D IF-ED10 - 76m(52mm) Jul 1996
Film Nikon AF-I Nikkor 600mm F/4D ED-IF9 - 76m(39mm) Sep 1992
Film Nikon AI-S Nikkor 600mm F/4 ED-IF8 - 66.5m(39mm) Mar 1986
Film Nikon AI-S Nikkor 600mm F/4 ED-IF8 - 66.5m160mm Apr 1982
Film Nikon AI Nikkor 600mm F/4 ED-IF8 - 66.5m160mm Jun 1977

Specification

Announced: July 2015
Production status: In production
Maximum format: 35mm full frame
Mount: Nikon F
Optical design
Diagonal angle of view: 4.1° (35mm full frame)
2.7° (Nikon APS-C)
Lens construction: 16 elements in 12 groups, including 4 ED, 2 FL
Diaphragm mechanism
Diaphragm control system: Electromagnetic
Number of blades: 9
Focusing
Focusing method: Internal focusing (IF)
Closest focusing distance: 4.4m
Focusing distance range limiter: FULL;10-
Focusing modes: Both autofocus and manual focus
Type of autofocus motor: Silent Wave Motor
Focus mode selector: A/M - M/A - M
Manual focus override in autofocus mode: Available
Additional features: AF-L - MEMORY RECALL - AF-ON
Image stabilizer
Vibration Reduction (VR): Yes
Stabilizer features: VR NORMAL
VR SPORT
Tripod Detection
Stabilizer efficiency: up to 4 stops
Physical characteristics
Weight: 3810g
Maximum diameter x Length: Ø166×432mm
Materials: Metallic barrel, metallic mount
Weather sealing: Dust-proof and water-resistant barrel
Fluorine coating: Front element
Filters: 40.5mm (rear)
Lens hood: Slip-on HK-40 (round, plastic)

Manufacturer description

July 2, 2015

Pack Lighter to Go Further: Nikon Announces Two New Professional Super Telephoto NIKKOR Lenses

The AF-S NIKKOR 500mm f/4E FL ED VR and AF-S NIKKOR 600mm f/4E FL ED VR Lenses Dominate the Sidelines With Superior Optical and AF Tracking Performance, While New Design Reduces Weight

MELVILLE, NY – Today, Nikon Inc. announced two new super telephoto lenses, the AF-S NIKKOR 500mm f/4E FL ED VR and AF-S NIKKOR 600mm f/4E FL ED VR. These two NIKKOR lenses use the latest Nikon lens technologies to enhance autofocus (AF) tracking and optical performance, while benefitting photographers with a significant reduction in weight. Ideal for sports, action, wildlife and press events, these lenses offer photographers the ability to capture striking images from afar with brilliant clarity and sharpness.

“The new NIKKOR 500mm and 600mm f/4 lenses were developed to give photographers the advantage on the sidelines or in the field, with a lens that can keep up with the action and get the decisive shot,” said Masahiro Horie, Director of Marketing and Planning, Nikon Inc. “By the fourth quarter or final period, users will sincerely appreciate the weight reduction of these lenses which allow for extended shooting, even into overtime.”

Increased Performance, Reduced Weight

These new super telephoto NIKKOR lenses have been optimized for today's high-resolution image sensors and fast-shooting Nikon DSLR cameras. The new lens designs significantly improve AF tracking performance, helping photographers to capture images of dynamic wildlife or athletes in precise clarity, even when subjects are moving erratically, at random speeds or at the camera. Both lenses also utilize Nikon’s Electromagnetic Diaphragm, helping to maintain consistent exposure during high-speed burst shooting of fast action.

The addition of fluorite lens elements to the optical formula helps to reduce chromatic aberration, as well as decrease the overall weight of the lenses, saving nearly two pounds (lbs.) for the 500mm f/4E FL ED VR, and nearly three lbs. for the 600mm f/4E FL ED VR. For extended shooting days in the field, the AF-S NIKKOR 500mm and 600mm lenses also employ magnesium alloy construction for enhanced durability and further weight reduction.

Because the AF-S NIKKOR 500mm f/4E FL ED VR weighs in at just 6.8 lbs./3090 grams (vs. 8.5 lbs./3880g of its predecessor), super telephoto performance has never been so light. This premium NIKKOR lens is ideal for nature and sports photographers who are always traveling on assignment and are looking for a fast, constant aperture lens to capture photos and HD video from a distance. The combination of nimble agility, low-light capability and superior optical performance makes this lens an obvious choice for tack-sharp images of birds in flight, aircraft or other fast moving subjects when a tripod is not always an option. The optical formula of this lens combines two fluorite elements and three Extra Low Dispersion (ED) glass elements to further reduce chromatic aberration while providing superior sharpness and color accuracy.

For long reach with superior optical performance, professional photographers should consider the AF-S NIKKOR 600mm f/4E FL ED VR, which provides the ultimate in fast-aperture and focal distance for challenging subjects. With a constant aperture of f/4, the new 600mm lens gives the photographer the ability to fill the frame and create dramatic separation between subject and background. With a weight of merely 8.3 lbs. /3810g (vs. 11.5 lbs./5060g of its predecessor), the lens features two fluorite lens elements and four ED elements to provide discerning photographers with unrivaled sharpness.

NIKKOR Lens Technologies

Adding to a long legacy of renowned optical excellence, both lenses feature the most advanced NIKKOR lens technologies, including the addition of Nikon’s exclusive Nano Crystal Coat to further reduce instances of ghosting and flare; an essential feature for capturing outdoor sports or action under the lights. Both lenses also incorporate Nikon Vibration Reduction (VR) technology, affording up to four stops of image stabilization*, with automatic tripod detection to counteract vibrations when mounted on a tripod. For pros shooting fast and erratic moving sports or subjects, using the SPORT VR mode will yield a more stable viewfinder image whether handholding the lens, using a monopod or even when panning.

For enhanced durability, both lenses are sealed and gasketed against the elements and have a fluorine coating on a front protective meniscus element to make it easier to remove dirt, moisture and smudges from the lens surface. For shooting from extreme distances, the new lenses are also compatible with select Nikon teleconverters** that provide photographers with the ability to autofocus up to f/8 with many Nikon professional DSLR bodies.

Design and features

The lens barrel is large, heavy, made of metal. The lens mount is metallic and features a rubber gasket to prevent water from entering the camera chamber throughout the lens mount. The lens has a dust-proof and water-resistant construction for keeping it in working condition even in extreme weather conditions (snowfall, rain, fog etc.). The lens is equipped with the distance scale behind a window and a depth of field scale. The rubberized focusing ring is very wide and located at the central part of the lens.

The lens incorporates an electromagnetic diaphragm mechanism (EMD) which provides highly accurate diaphragm control and stable auto exposure performance during continuous shooting.

The lens features A/M - M/A - M focus mode switch.

A/MAutofocus mode that reduces the sensitivity of the manual override to prevent unexpected switching from auto to manual.
M/AAutofocus mode that allows switching to manual focus with virtually no time lag - even during autofocus servo operation and regardless of autofocus mode in use.
MManual focus mode.

The lens features AF-L - MEMORY RECALL - AF-ON switch which allows to select the function assigned to the focus function button located on the lens barrel.

AF-LTemporary lock autofocus. Useful whenever any unwanted obstacle comes closer to the camera than the moving subject you are tracking. If the shutter button is still pressed halfway when the focus function button is released, autofocusing will continue as before. This function operates only in autofocus mode.
MEMORY RECALLFocus on preset focusing distance even while you are shooting a different subject. This function operates in any focusing mode. To preset the focusing distance, focus the distance you want to preset and press the MEMORY SET button. To focus on preset distance, set the switch to MEMORY RECALL, keep the focus function button pressed and then take the photograph. The previous focus is restored when the focus function button is released.
AF-ONAutofocus using the focus function button. The shutter button only releases the shutter in this mode. To lock focus or suspend autofocus, release the focus function button. Useful whenever any unwanted obstacle comes closer to the camera than the moving subject you are tracking. This function operates only in autofocus mode.

The lens features focusing distance range limiter which allows to choose between the following focusing distance ranges:

FULLFull range of focusing distances.
10m - ∞Range of focusing distances suitable for shooting distant subjects.

By setting the suitable focusing distance range, the actual autofocusing time can be shorter.

A drop-in filter holder with a neutral filter comes with the lens. The holder accepts 40.5mm filters. The filter holder must be always in place because the filter is a part of the lens optical system.

A fluorine coating has been applied to the outer surface of the front lens element to repel particles of dust, water or oil drops for easier cleaning of the lens surface.

The round slip-on lens hood HK-40 attaches to the lens barrel behind the front rim. A knurled screw tightens a retaining ring, holding the hood firmly to the lens. The rigid construction and secure fit provide maximum physical protection to the front lens element.

Alternatives (AF, 528..672mm)

Your comment

Copy this code

and paste it here *

  1. Put camera on a tripod
  2. Disable image stabilization function
  3. Switch camera to aperture-priority automatic exposure mode (A/Av)
  4. Select at least aperture value F/8 to obtain as large depth of field as possible
  5. Use as low ISO as possible (f.e. 100 or 200) to achieve the widest dynamic range of sensor
  6. Use remote shutter control or self-timer (to set a delay before the shutter's firing) to avoid image blur due to camera shake at relatively slow shutter speeds
  • Compatibility

EMD lenses are not compatible with Nikon D2- or D1-series, D200, D100, D90, D80, D70, D70s, D60, D50, D40, D40X, D3000 digital SLR cameras.

Aperture

The aperture stop is an important element in most optical designs. Its most obvious feature is that it limits the amount of light that can reach the image/film plane. Typically, a fast shutter will require a larger aperture to ensure sufficient light exposure, and a slow shutter will require a smaller aperture to avoid excessive exposure.

A device called a diaphragm usually serves as the aperture stop, and controls the aperture. The diaphragm functions much like the iris of the eye – it controls the effective diameter of the lens opening. Reducing the aperture size increases the depth of field, which describes the extent to which subject matter lying closer than or farther from the actual plane of focus appears to be in focus. In general, the smaller the aperture (the larger the number), the greater the distance from the plane of focus the subject matter may be while still appearing in focus.

The lens aperture is usually specified as an f-number, the ratio of focal length to effective aperture diameter. A lens typically has a set of marked "f-stops" that the f-number can be set to. A lower f-number denotes a greater aperture opening which allows more light to reach the film or image sensor.

The specifications for a given lens typically include the maximum and minimum aperture sizes, for example, f/1.4–f/22. In this case f/1.4 is the maximum aperture (the widest opening), and f/22 is the minimum aperture (the smallest opening). The maximum aperture opening tends to be of most interest, and is always included when describing a lens. This value is also known as the lens "speed", as it affects the exposure time. Lenses with apertures opening f/2.8 or wider are referred to as "fast" lenses. Zoom lenses typically have a maximum relative aperture (minimum f-number) of f/2.8 to f/6.3 through their range. High-end lenses will have a constant aperture, such as f/2.8 or f/4, which means that the relative aperture will stay the same throughout the zoom range. A more typical consumer zoom will have a variable maximum relative aperture, since it is harder and more expensive to keep the maximum relative aperture proportional to focal length at long focal lengths; f/3.5 to f/5.6 is an example of a common variable aperture range in a consumer zoom lens.

Autofocus motor

Micromotors and built-in motors of Nikon, Pentax and Sony digital SLR cameras provide moderately noisy and acceptably fast autofocus.

With ultrasonic, linear or stepping motor it is possible to achieve very fast and virtually silent autofocus. Moreover, the use of linear or stepping motor ensures smooth continuous focusing which makes lenses with such types of motors ideal for video recording.

The accuracy of autofocus does not depend on type of used autofocus motor but depends on focusing method (contrast or phase detection), autofocus algorithms, lighting conditions and other factors.

Manual focus override in autofocus mode

Allows to perform final focusing manually after the camera has locked the focus automatically. Note that you don't have to switch camera and/or lens to manual focus mode.

Manual focus override in autofocus mode

Allows to perform final focusing manually after the camera has locked the focus automatically. Note that you don't have to switch camera and/or lens to manual focus mode.

Electronic manual focus override is performed in the following way: half-press the shutter button, wait until the camera has finished the autofocusing and then focus manually without releasing the shutter button using the focusing ring.

Image stabilizer

A technology used for reducing or even eliminating the effects of camera shake. Gyro sensors inside the lens detect camera shake and pass the data to a microcomputer. Then an image stabilization group of elements controlled by the microcomputer moves inside the lens and compensates camera shake in order to keep the image static on the imaging sensor or film. The technology allows to increase the shutter speed by several stops and shoot handheld in such lighting conditions and at such focal lengths where without image stabilizer you have to use tripod, decrease the shutter speed and/or increase the ISO setting which can lead to blurry and noisy images.

Focusing method

Photographic lenses carry out focusing using one of the following five methods:

Methods of internal and rear focusing have the following advantages:

Aspherical elements (ASPH, XA, XGM) are used in wide-angle lenses for correction of distortion and in large-aperture lenses for correction of spherical aberration, astigmatism and coma, thus ensuring excellent sharpness and contrast even at fully open aperture. The effect of the aspherical element is determined by its position within the optical formula: the more the aspherical element moves away from the aperture stop, the more it influences distortion; close to the aperture stop it can be particularly used to correct spherical aberration. Aspherical element can substitute one or several regular spherical elements to achieve similar or better optical results, which allows to develop more compact and lightweight lenses.

Low dispersion elements (AD, ED, LD, HLD, SD, UD etc) and fluorite elements minimize chromatic aberrations and ensure excellent sharpness and contrast even at fully open aperture.

Organic Blue Spectrum Refractive Optics (BR Optics) material placed between convex and concave elements made from traditional optical glass provides more efficient correction of lateral chromatic aberrations in comparison with fluorite, UD and even Super UD elements.

Diffraction elements (DO, PF) cancel chromatic aberrations at various wavelengths. This technology results in smaller and lighter lenses in comparison with traditional designs with no compromise in image quality.

High refractive index elements (XR, UXR, HID, HR, HRI etc) minimize field curvature and spherical aberration. High refractive index element can substitute one or several regular elements to achieve similar or better optical results, which allows to develop more compact and lightweight lenses.

Apodization element (APD) is in fact a radial gradient filter. It practically does not change the characteristics of light beam passing through its central part but absorbs the light at the periphery. It sort of softens the edges of the aperture making the transition from foreground to background zone very smooth and results in very attractive, natural looking and silky smooth bokeh.

Lens construction

Lens construction – a specific arrangement of elements and groups that make up the optical design, including type and size of elements, type of used materials etc.

Element - an individual piece of glass which makes up one component of a photographic lens. Photographic lenses are nearly always built up of multiple such elements.

Group – a cemented together pieces of glass which form a single unit or an individual piece of glass. The advantage is that there is no glass-air surfaces between cemented together pieces of glass, which reduces reflections.

Efficiency of Image Stabilizer

The efficiency of image stabilizer is measured in stops and each stop corresponds to a two-times increase of shutter speed. For example, if you are shooting at focal length of 80mm and it is known that the efficiency of image stabilizer is 3 stops, it means that during handheld shooting at such focal length you can use shutter speed of 1/10 second which is exactly 23 times longer than the shutter speed 1/80 second needed to obtain sharp image in sufficient lighting conditions.

Zooming method

The rotary zooming method means that the change of the focal length is achieved by turning the zoom ring and the manual focusing - by turning the separate focusing ring.

The push/pull zooming method means that the change of focal length and the manual focusing is achieved by one and the same ring. The change of focal length happens when the photographer moves the ring towards the mount or backwards and the rotation of the ring leads to change of focus.

Push/pull zooming allows for faster change of focal length, however conventional method based on the rotation of the zoom ring provides more accurate and smooth zooming.

Zoom lock

The lens features a zoom lock to keep the zoom ring fixed. This function is convenient for carrying a camera with the lens on a strap because it prevents the lens from extending.

Lens hood

A lens hood or lens shade is a device used on the end of a lens to block the sun or other light source in order to prevent glare and lens flare. Flare occurs when stray light strikes the front element of a lens and then bounces around within the lens. This stray light often comes from very bright light sources, such as the sun, bright studio lights, or a bright white background The light source itself may be in the lens' angle of view, but it doesn't have to be to cause a lens flare. It is only necessary that stray light from the bright light source enter the lens.

The geometry of the lens hood can vary from a plain cylindrical or conical section (much like a lamp shade) to a more complex shape, sometimes called a petal, tulip, or flower hood. These more complex shapes take into account the final image's shape and aspect ratio. This allows the lens hood to block stray light with the higher portions of the lens hood, while allowing more light into the corners of the image through the lowered portions of the hood, thereby reducing the amount of vignetting in the final image.

Lens hoods are more prominent in long focus lenses because they have a smaller viewing angle than that of wide-angle lenses. For wide angle lenses, the length of the hood (away from the end of the lens) cannot be as long as those for telephoto lenses, as a longer hood would enter the wider field of view of the lens.

Lens hoods that are supplied by the manufacturer of the lens are often designed to fit onto the matching lens facing either forward, for normal use, or backwards, so that the hood may be stored with the lens without occupying much additional space. Rubber lens hoods are flexible and generally collapse for storage. In addition, lens hoods can offer some degree of physical protection for the lens due to the hood extending farther than the lens itself.

Angle of view

Angle of view describes the angular extent of a given scene that is imaged by a camera. It is used interchangeably with the more general term field of view.

A camera's angle of view depends not only on the lens, but also on the sensor. Digital sensors are usually smaller than 35mm film, and this causes the lens to have a narrower angle of view than with 35mm film, by a constant factor for each sensor (called the crop factor).

This website calculates angles of view of lenses automatically by the following formula: 114.6 * arctan (21.622 / CF * FL),

where:

CF – crop-factor of a sensor,
FL – focal length of a lens.

Mount

A lens mount is an interface — mechanical and often also electrical — between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the rangefinder and SLR cameras.

A lens mount may be a screw-threaded type, a bayonet-type, or a breech-lock (friction lock) type. Modern still camera lens mounts are of the bayonet type, because the bayonet mechanism precisely aligns mechanical and electrical features between lens and body. Screw-threaded mounts are fragile and do not align the lens in a reliable rotational position.

Lens mounts of competing manufacturers (Canon, Nikon, Pentax, Sony etc.) are always incompatible. In addition to the mechanical and electrical interface variations, the flange focal distance from the lens mount to the film or sensor can also be different. These incompatibilities are probably due to the desire of manufacturers to lock in consumers to their brand.

Closest focusing distance

Distance from the focal plane (film or sensor) to the subject.

Closest working distance

Distance from the front of the lens to the subject.

Magnification ratio

Determines how large the subject will appear in the final image. A magnification ratio of 1:1 means that the image of the subject formed on the film or sensor will be the same size as the subject in real life. For this reason, a 1:1 ratio is often called "life-size". A lens is not considered to be "true" macro unless it can achieve at least life-size magnification.

Weight

Excluding caps and detachable accessories such as lens hood, close-up adapter, tripod adapter etc.

Maximum diameter x Length

Excluding caps and detachable accessories such as lens hood, close-up adapter, tripod adapter etc.

Distortion

A form of optical aberration, a deviation from rectilinear projection in which straight lines in a scene remain straight in an image.

Although distortion can be irregular or follow many patterns, the most commonly encountered distortions are radially symmetric, or approximately so, arising from the symmetry of a photographic lens. These radial distortions can usually be classified as either barrel distortions or pincushion distortions.

In barrel distortion, image magnification decreases with distance from the optical axis. The apparent effect is that of an image which has been mapped around a sphere (or barrel). Fisheye lenses, which take hemispherical views, utilize this type of distortion as a way to map an infinitely wide object plane into a finite image area. In a zoom lens barrel distortion appears in the middle of the lens's focal length range and is worst at the wide-angle end of the range.

In pincushion distortion, image magnification increases with the distance from the optical axis. The visible effect is that lines that do not go through the centre of the image are bowed inwards, towards the centre of the image, like a pincushion.

In photography, distortion is particularly associated with zoom lenses, particularly large-range zooms, but may also be found in prime lenses. Barrel distortion may be found in wide-angle lenses, and is often seen at the wide-angle end of zoom lenses, while pincushion distortion is often seen in older or low-end telephoto lenses.

Correction usually requires cropping out curved edges of the corrected image which can influence the composition. Moreover, correction leads to redistribution of image resolution – the center of the frame will lose some sharpness and the edges become sharper after the correction of pincushion distortion and vice versa, the center of the frame become sharper and the edges will lose some sharpness as the result of correction of barrel distortion. The results of correction could be especially noticeable for wide-angle lenses because most of lenses of such class suffer from resolution drop at the edges and especially at the corners of the frame. Thereby the correction should be performed only for those pictures which contain straight lines (f.e. images of architecture).

Vignetting

Vignetting is a reduction of an image's brightness or saturation at the periphery compared to the image center. Vignetting is often an unintended and undesired effect caused by camera settings or lens limitations. However, it is sometimes deliberately introduced for creative effect, such as to draw attention to the center of the frame. A photographer may deliberately choose a lens which is known to produce vignetting to obtain the effect, or it may be introduced with the use of special filters or post-processing procedures.

Correction of vignetting requires brightening of the edges and corners of the frame. Such correction however increases digital noise at the corresponding areas of the frame because digitally brightening an image amplifies both the signal and the noise equally. That’s why shooting at the maximum aperture should be avoided whenever possible since the all lenses have the strongest vignetting at their maximum aperture.

In some cases, the optical vignetting can be minimized by closing of the aperture by one or several stops. However even the significant closing of the aperture may not have the noticeable effect with some models of wide-angle lenses.

Fluorine coating

Helps keep lenses clean by reducing the possibility of dust and dirt adhering to the lens and by facilitating cleaning should the need arise. Applied to the outer surface of the front and/or rear lens elements over multi-coatings.

Floating element system

Provides correction of aberrations and ensures constantly high image quality at the entire range of focusing distances from infinity down to the closest focusing distance. It is particularly effective for the correction of field curvature that tends to occur with large-aperture, wide-angle lenses when shooting at close ranges.

Non-retrofocus lens

The lens was designed for use with 35mm film SLR cameras with the mirror locked in the up position. The lens extended into the SLR's mirror box when mounted. Mirror lock-up must be activated prior to mounting the lens; otherwise its rearmost element would be in the way as the mirror flipped up and down during exposure. A separate optical viewfinder had to be mounted on the accessory shoe to confirm angle of view, because when the mirror is in the up and locked position, the subject is no longer visible through the viewfinder.

Spherical aberration

Because of the spherical aberration the parallel light rays passing through the edge of the lens converge at the focal point closer to the lens than the rays passing through the lens center. Large aperture lenses suffer from stronger spherical aberration. Rays of light passing near the optical axis form a sharp point on the image sensor of a camera but under the influence of the peripheral rays of light the point light source receives a uniform halo. Spherical aberration affects the whole image field from the center to the edges and results in a blurred image with lower contrast.

The correction of spherical aberration of spherical lenses is very complex and does not ensure its complete elimination. The residual aberration can be significantly reduced by closing of the aperture, because the edges of the lens are thus blocked. The only effective way to substantially compensate for the spherical aberration at the maximum relative aperture of the large aperture lens is the use of aspherical elements. Uncorrected spherical aberration can cause a focus shift.

Bokeh

Bokeh is a quite subjective concept as the perception of the image depends on the viewer. Some like "nervous" bokeh with twisted or doubled background. Some prefer out-of-focus highlights to take the form of a polygonal shape. However most of the people like the following characteristics:

Filters

There are two basic types of lens filters - circular that screw directly on the filter thread in front of the lens, and square ones, which slot into a filter holder.

Circular screw-on filters protect the surface of the front lens element against dust, moisture, fingerprints, scratches and bumps. Square gelatin filters are dropped into place in slot that keeps it flat and parallel to the focal plane in order to maintain optimal image quality. Drop-in filters are mostly used in super telephoto lenses due to the large size of the front lens element.

The primary function of lens filters is to improve the image quality and/or produce special effects.

Format

Format refers to the shape and size of film or image sensor.

35mm is the common name of the 36x24mm film format or image sensor format. It has an aspect ratio of 3:2, and a diagonal measurement of approximately 43mm. The name originates with the total width of the 135 film which was the primary medium of the format prior to the invention of the full frame digital SLR. Historically the 35mm format was sometimes called small format to distinguish it from the medium and large formats.

APS-C is an image sensor format approximately equivalent in size to the film negatives of 25.1x16.7mm with an aspect ratio of 3:2.

Weather sealing

Weather sealed lenses contain a rubber material which is inserted in between each externally exposed part (manual focus and zoom rings, buttons, switch panels etc.) to ensure it is properly sealed against dust and moisture.

Lenses that accept front mounted filters typically do not have gaskets behind the filter mount. It is recommended to use a filter for complete weather resistance when desired.

Diaphragm type

SLR cameras require stopping down to the chosen aperture immediately before exposure, in order to permit viewing and focusing at full aperture up to the moment the shutter is released.

Historically, there are four different types of diaphragm:

Manual – the diaphragm must be stopped down manually by rotating the detent aperture ring,

Pre-set – the lens has two rings, one is for pre-setting, while the other is for normal diaphragm adjustment. The first ring must be set at the desired aperture, the second ring then should be fully opened for focusing, and turned back for stop down to the pre-set value,

Semi-automatic – the lens features spring mechanism in the diaphragm, triggered by the shutter release, which stops down the diaphragm to the pre-set value. The spring needs to be reset manually after each exposure to re-open diaphragm to its maximum value,

Automatic – the actuating lever in the camera, operated by the shutter release, closes the diaphragm down during the shutter operation. On completion of the exposure, the diaphragm re-opens to its maximum value.

Hybrid IS

The image stabilizer has Hybrid IS technology which corrects not only angle but also shift camera shake, which is more pronounced in close-range shooting when a camera moves parallel to the imaging scene. Hybrid IS dramatically enhances the effects of image stabilization during shooting, including macro shooting, which had proven difficult for conventional image stabilization technologies.

Dynamic IS

The image stabilizer has Dynamic IS technology which especially effective when shooting while walking because it compensates strong camera shake. Dynamic IS activates automatically when the camera is set to movie shooting.

Mode 1

Corrects vertical and horizontal camera shake. Mainly effective for shooting still subjects.

Mode 2

Corrects vertical camera shake during following shots in a horizontal direction. Corrects horizontal camera shake during following shots in a vertical direction.

Mode 2

Corrects vertical camera shake during following shots in a horizontal direction.

Mode 2 (Intelligent OS)

The lens incorporates Intelligent OS with algorithm capable of panning in all directions. In Mode 2, the movements of subjects can be captured with panning effects even when the camera is moved horizontally, vertically, or diagonally — regardless of the position of the lens.

Mode 3

Corrects camera shake only during exposure. During panning shots, corrects camera shake during exposure only in one direction the same as Mode 2. Effective for following fast and irregulary moving subjects.

Panning Detection

The image stabilizer automatically detects panning and then corrects camera shake only in one direction

Tripod Detection

It is often thought that image blur caused by camera shake can be prevented by using a tripod. Actually, however, even using a tripod may result in image blur because of tripod vibration caused by mirror or shutter movement at the time of exposure. The image stabilizer automatically differentiates the frequency of the vibration from that of camera shake, and changes algorithm to correct image blur caused by slight tripod vibration.

VR NORMAL

Corrects vertical and horizontal camera shake. Automatically detects panning and then corrects camera shake only in one direction.

VR ACTIVE

Corrects vertical and horizontal camera shake when shooting from a moving vehicle, or some other unstable position. Panning is not detected.

VR SPORT

Allows a continuous shooting frame rate and release time lag similar to those that are possible when image stabilizer is turned off. Automatically detects panning and then corrects camera shake only in one direction.

VR TRIPOD

It is often thought that image blur caused by camera shake can be prevented by using a tripod. Actually, however, even using a tripod may result in image blur because of tripod vibration caused by mirror or shutter movement at the time of exposure. The image stabilizer automatically differentiates the frequency of the vibration from that of camera shake, and changes algorithm to correct image blur caused by slight tripod vibration.

NIKON F BAYONET MOUNT

Designed by: Nikon Corporation
Announced: 1959
Discontinued: None
Maximum format: 35mm full frame
Camera type: Single-Lens Reflex
AF support: Yes
Flange focal distance: 46.5mm

Copyright © 2012-2019 Eugene Artemov. All rights reserved.

Translation and/or reproduction of website materials in any form, including the Internet, is prohibited without the express written permission of the website owner.